patdi85
0
Followers
0
Following
0
Games
Games
Shoutbox
ProdigyFlash94
Thank you for this helping post for Crash Course 2: part 9 keeping the ship on the screen
patdi85
Here is step by step to getting the ship on screen to work:
1: Add event updated.
2: From flow, conditionals: drag on if
3: From if dropdown, select comparison, inequality , 0 < 0. there should two dropdowns.
4: 1st drop down, select actor, basics: select x of self
5: Enter 0 in second dropdown
6: From Actor, position box on right, select set x to 0 for self. Override 0 with a 1
7: From flow, conditionals select otherwise if and drag under existing if just created.
8: In otherwise if dropdown select comparison, inequalties, select 0 > 0
9: In the 1st dropdown of the 0 > 0,
0
Thank you for this helping post for Crash Course 2: part 9 keeping the ship on the screen
patdi85
Here is step by step to getting the ship on screen to work:
1: Add event updated.
2: From flow, conditionals: drag on if
3: From if dropdown, select comparison, inequality , 0 < 0. there should two dropdowns.
4: 1st drop down, select actor, basics: select x of self
5: Enter 0 in second dropdown
6: From Actor, position box on right, select set x to 0 for self. Override 0 with a 1
7: From flow, conditionals select otherwise if and drag under existing if just created.
8: In otherwise if dropdown select comparison, inequalties, select 0 > 0
9: In the 1st dropdown of the 0 > 0,
0
ProdigyFlash94
Thank you for this helping post for Crash Course 2: part 9 keeping the ship on the screen
patdi85
Here is step by step to getting the ship on screen to work:
1: Add event updated.
2: From flow, conditionals: drag on if
3: From if dropdown, select comparison, inequality , 0 < 0. there should two dropdowns.
4: 1st drop down, select actor, basics: select x of self
5: Enter 0 in second dropdown
6: From Actor, position box on right, select set x to 0 for self. Override 0 with a 1
7: From flow, conditionals select otherwise if and drag under existing if just created.
8: In otherwise if dropdown select comparison, inequalties, select 0 > 0
9: In the 1st dropdown of the 0 > 0, select actor, basics: select x of self
10: in 2nd dropdown if the 0 > 0, select math, Arithmetic, 0 - 0. You should now have 2 dropdowns.
11: In 1st unfilled dropdown for the 0 - 0, select scene, screen width
.
12: In the 2nd unfilled dropdown for the 0 - 0, select Actor, Basics, width of self.
13: From right, under Actor, Position, select set x to 0 for self under the otherwise if.
14: select math, Arithmetic, 0 - 0. You should now have 2 dropdowns.
15: In the Math 0 - 0, in the first dropdown, again select Math, Arithmetic, 0 - 0. this will give 3 dropdowns to create the second part of the otherwise if.
16: In 1st unfilled dropdown, select scene, screen width
17: In 2nd unfulled dropdown, select Actor, Basics, width of self.
18: In 3rd dropdown, enter 1. Ath this point it should match pitcure above Step 67.
19: Test and verify everything works.
Really helpful..I appreciate it thanks!!! :-D
0
Thank you for this helping post for Crash Course 2: part 9 keeping the ship on the screen
patdi85
Here is step by step to getting the ship on screen to work:
1: Add event updated.
2: From flow, conditionals: drag on if
3: From if dropdown, select comparison, inequality , 0 < 0. there should two dropdowns.
4: 1st drop down, select actor, basics: select x of self
5: Enter 0 in second dropdown
6: From Actor, position box on right, select set x to 0 for self. Override 0 with a 1
7: From flow, conditionals select otherwise if and drag under existing if just created.
8: In otherwise if dropdown select comparison, inequalties, select 0 > 0
9: In the 1st dropdown of the 0 > 0, select actor, basics: select x of self
10: in 2nd dropdown if the 0 > 0, select math, Arithmetic, 0 - 0. You should now have 2 dropdowns.
11: In 1st unfilled dropdown for the 0 - 0, select scene, screen width
.
12: In the 2nd unfilled dropdown for the 0 - 0, select Actor, Basics, width of self.
13: From right, under Actor, Position, select set x to 0 for self under the otherwise if.
14: select math, Arithmetic, 0 - 0. You should now have 2 dropdowns.
15: In the Math 0 - 0, in the first dropdown, again select Math, Arithmetic, 0 - 0. this will give 3 dropdowns to create the second part of the otherwise if.
16: In 1st unfilled dropdown, select scene, screen width
17: In 2nd unfulled dropdown, select Actor, Basics, width of self.
18: In 3rd dropdown, enter 1. Ath this point it should match pitcure above Step 67.
19: Test and verify everything works.
Really helpful..I appreciate it thanks!!! :-D
0
" id="comment_form">
Recent Activity
Forum Profile
Stencyler
Rank
0
Posts
0 Followers
Following Nobody
